ROUTER STATIC DENGAN PACKET TRACER

1.Sediakan 3 router atau lebih dengan 3 port serial/sesuka hati anda.
2.Sediakan juga 2 port fast ethernet
3.Atur ip masing – masing router

Router 1
Serial 0/0 ip : 192.168.1.254
Netmask : 255.255.255.0
Router 2
Serial 0/0 ip : 192.168.1.1
Netmask : 255.255.255.0
Serial 1/0 ip : 192.168.2.1
Netmask : 255.255.255.0
Router 3
Serial 0/0 Ip : 192.168.2.2
Netmask : 255.255.255.0
Serial 1/0 ip :192.168.3.1
Netmask : 255.255.255.0



4.Setelah disambungkan, ping antar router



5.Beri client pada router 1

Atur ip FastEthernet Router 1
FastEthernet 3/0 ip : 192.168.2.254
Netmask : 255.255.255.0
> beri 2 client pada router 1
setting ip pc 1
gateway : 192.168.2.254
ip address : 192.168.2.1
netmask : 255.255.255.0

setting ip pc 2
gateway : 192.168.2.254
ip address : 192.168.2.2
netmask : 255.255.255.0
setelah selesai, sambungkan



6.Sekarang masukkan konfigurasi static pada tiap-tiap router dengan mode CLI atau grafik



Masuk ke configurasi terminal
Ketik ip route network (tujuan) netmask ip address (yang dilalui)

Router 1 :
Router>ena
Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip rou
Router(config)#ip rou
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.1.1
Router(config)#


Router 2:
Router>ena
Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2
Router(config)#

Router 3:
Router>ena
Router#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.2.1
Router(config)#

Setelah selesai coba ping antar router dan router client